Weidemann T6207

The compact telehandler

Weidemann T6207

The compact telehandler

The compact Weidemann telehandlers are unique in the combination of lift height, width and machine capacity. With the all-wheel drive and all-wheel steering, you are absolutely stable and well-equipped for many different tasks. Those who drive a Weidemann telehandler simply will no longer give it up.

Weidemann T6207 Standard components

Motor

KDI 2504 TCR (55.4 kW/75 hp), exhaust emission standard level III B
Exhaust after-treatment: DOC (diesel oxidation catalytic converter)

Drive system

Planetary axle PAL 1720
Hydrostatic 4 wheel drive, electronically regulated, travel direction can be selected via joystick
Service brake: Hydrostatic drive system acting on all 4 wheels (wear-free)
Central service and parking brake in the drive train acting on all 4 wheels
Tyres 12.5-18 MPT-01

Steering system

Hydraulic all-wheel steering, steering angle 2 x 38°
3 steering modes available: All-wheel steering, front axle steering and crab steering

Hydraulics

3rd control circuit front, proportionally via joystick
Continuous function for 3rd control circuit connectable via keypad
Gear pump with load-independent flow distribution (LUDV)
Hydraulic oil cooler
Driver assistance system vls (Vertical Lift System), 3 modes available: Bucket mode, stacking mode and manual mode

Operator’s compartment

Comfort cabin with heater and ventilation, ROPS/FOPS tested (acoustically insulated, vibration-damped)
Comfort seat with safety belt
Hydraulic pilot operated joystick with forward-reverse control switch and proportional telescoping function
Rear window can be opened
Left side window can be raised in 2 positions
Hanging pedals
Bottle holder and storage compartments
Window wiper in front and rear

Other

Operating hour meter
Battery isolator switch
Fuel display
Lighting according to Road Traffic Regulations
1 work light in front, 1 work light at rear
Mechanical quickhitch system for attachments
Co-driven mudguard on all wheels
Final position dampening in the telescopic cylinder

Contact Us / Book a Demo


Weidemann T6207 Dimensions

Standard lightweight bucket 2.000 mm
A: Total length 4.958 mm
B: Total length (without bucket) 4.400 mm
C: Axle middle to bucket pivot pin 1030 mm
D: Wheelbase 2.650 mm
E: Rear overhang 720 mm
F: Height to top of cabin – low-profile 1.980 mm
F: Height to top of cabin – high-profile 2.100 mm
H: Seat top height 1.025 mm
J: Total working height 6.580 mm
K: Height of bucket pivot (max.) 6.080 mm
L1: Load-over height Retracted telescopic arm 3.730 mm
L: Load-over height Extended telescopic arm 5.600 mm
M1: Dumping height Retracted telescopic arm 3.450 mm
M: Dumping height Extended telescopic arm 5.280 mm

N: Operating distance for M 680 mm
O: Digging depth 150 mm
P: Total width 1.960 mm
Q: Track width 1.660 mm
S: Ground clearance 250 mm
T: Maximum radius external 4.500 mm
U: Radius at the outer edge 3.670 mm
V: Inside turning radius 1.700 mm
X: Rollback angle at max. lifting height 45 °
Y: Dumping angle (max.) (max.) 40 °
Z: Rollback angle (on the ground) 45 °

All values with a standard bucket and standard tyres